Desco TFE-Seal 110X is a premium sealant for worn, damaged and leaking valves. TFE-Seal 110X is formulated with 100% synthetic base fluid for excellent resistance to washout from
hydrocarbons. It contains chemically inert PTFE for ultimate sealing capability. Higher PTFE grades are available.
Service Recommendations:
Desco TFE-Seal 110X may be used on worn or pitted valves. It can also be used as a sealant for stuffing boxes or as an injectable packing.
| Appearance | Black, grainy, tacky |
| NLGI | 4 |
| Penetration (ASTM D217) | 175-205 |
| Worked Penetration, 60x (ASTM D217) | 175-205 |
| Base Oil | Natural and synthetic ester |
| Base Oil Viscosity | 1,000 cSt at 40°C |
| Base Oil Pour Point | -10°F (-12°C) |
| Thickener | Inorganic |
| Additives | H2S/corrosion inhibitor package |
| Solids Content | PTFE |
| Specific Gravity | 1.1 |
| Density (lb/gal) | 9.3 |
| Dropping Point (ASTM D566) | >500°F (260°C) |
| Flash Point | >500°F (260°C) |
| Temperature Range | -20°F to 350°F (-29°C to 177°C) |
| Resistance to Water (FTM 5415) | Pass |
| Resistance to 50% Ethanol in Water (FTM 5415) | Pass |
| Resistance to Synthetic Condensate (FTM 5415 mod) | Pass |
| Resistance to Mineral Spirits (FTM 5415 mod) | Pass |
| Resistance to 20% Hexane in Mineral Spirits (FTM 5415 mod) | Pass |
| Resistance to Diesel Fuel (FTM 5415 mod) | Pass |
| PART # | UNIT SIZE | CONTAINER |
|---|---|---|
| LL110150 | “J” stick 1 3/8” x 8 1/2” | 16 /box |
| LL110160 | “K” stick 1 1/2” x 10 1/2” | 12 /box |
| LL110010 | 10 lb | Can |
| LL110020 | 20 lb | Can |
| LL110040 | 45 lb | Pail |
| LL110120 | 120 lb | Keg |
