Desco TFE-Seal 104 Hydrocarbon Service (Contains PTFE) Sealant

A synthetic lubricant/sealant formulated for general hydrocarbon service. Contains fine grain PTFE particles suspended in a hydrocarbon base. Suitable for use on threads, gaskets, stuffing boxes and valve stems. Pumpable with a high pressure (10,000 psi) grease gun.

Service Recommendations:
Aliphatic hydrocarbons, crude distillates, crude oil, diesel fuel, hydrocarbon liquids, kerosene, LPG and lubricating oils.

Typical Characteristics

Appearance	Blue, grainy, tacky
NLGI	1-2
Penetration (ASTM D217)	280-320
Worked Penetration, 60x (ASTM D217)	280-320
Base Oil	Natural and synthetic ester
Base Oil Viscosity	800 cSt at 40°C
Base Oil Pour Point	5°F (-15°C)
Thickener	Inorganic
Additives	Antioxidant package
Solids Content	PTFE
Specific Gravity	1.3
Density (lb/gal)	10.6
Dropping Point (ASTM D566)	>500°F (260°C)
Flash Point	>500°F (260°C)
Temperature Range	0°F to 450°F (-18°C to 232°C)
Resistance to Water (FTM 5415)	Pass
Resistance to Mineral Spirits (FTM 5415 mod)	Pass
Resistance to Diesel Fuel (FTM 5415 mod)	Pass
Resistance to HCI(aq)	Pass

size		qty per box	part #
Small Stick	B 3/8″ x 1 1/2″ C 7/16″ x 2 1/8″ D 1/2″ x 2 1/4″ G 5/8″ x 3 1/2″	72 32 28 14	LL104110 LL104115 LL104130 LL104140
Large Stick	J 1 3/8″ x 8 1/2″ 1 1/2″ x 10 1/2″	16 12	LL104150 LL104160
Cartridge		10	LL104200
Brush Top Containers	16 oz. Container	12	LL104016
Bulk	10 lb can 20 lb pail 45 lb pail		LL104010 LL104020 LL104040

Desco TFE-Seal 104 Hydrocarbon Service (Contains PTFE) Sealant

Typical Characteristics

Downloads:

Products in the same category:

Desco TFE-Seal 108 For Hard to Seal Valves

Desco 620 Sealant/Lubricant for WKM Type Valves

Desco 660 Hydrocarbon Service for McEvoy Style Valves

Desco Valve Cut, Frees Corroded and Frozen Valves

Products

Contact

Social Sites