Desco TFE Versi-Pak is an injectable packing compound containing TFE-fluorocarbon particles blended into a synthetic binder. It is a highly versatile and durable self molding packing for use
in stuffing boxes and for all types of valves, pumps and mechanical equipment. It can be either pre-formed manually or pumped into place with a high pressure (10,000 psi) grease gun. TFE
Versi-Pak is chemically stable and resistant to most chemicals over a wide pH range.
Service Recommendations:
Desco TFE Versi-Pak is a permanent packing which can be supplemented and does not need to be replaced.
| Appearance | White, grainy, sticky |
| NLGI | 6 |
| Penetration (ASTM D217) | 80-90 |
| Base Oil | Synthetic |
| Base Oil Viscosity | 650 cSt at 100°C |
| Base Oil Pour Point | 41°F (5°C) |
| Solids Content | PTFE |
| Dropping Point (ASTM D566) | 392°F (200°C) |
| Specific Gravity | 1.6 |
| Density (lb/gal) | 13.7 |
| Flash Point | 392°F (200°C) |
| Temperature Range | -20°F to 450°F (-29°C to 232°C) |
| PART # | UNIT SIZE | CONTAINER |
|---|---|---|
| LP815110 | “B” stick 3/8” x 1 1/2” | 72 /box |
| LP815115 | “C” stick 7/16” x 2 1/8” | 32 /box |
| LP815130 | “D” stick 1/2” x 2 1/4” | 28 /box |
| LP815140 | “G” stick 5/8” x 3 1/2” | 14 /box |
| LP815150 | “J” stick 1 3/8” x 8 1/2” | 16 /box |
| LP815160 | K” stick 1 1/2” x 10 1/2” | 12 /box |
| LP815010 | 10 lb | Can |
| LP815020 | 25 lb | Can |
| LP815040 | 40 lb | Pail |
| LP815120 | 120 lb | Keg |
